120V AC Talking Photoelectric Smoke & Carbon Monoxide with Front-Load 9V Battery Backup
900-0213CA

Provides protection from two hazards – fire and CO – in one unit with Photoelectric sensor.

  • Combined Smoke & Carbon Monoxide Alarm – A single unit can be installed where previously, two were needed. 
  • Voice Warning – Announces the hazard type detected (in English and French). 
  • Photoelectric Technology – May detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms
  • 120 V Interconnectable – Will interconnect with up to 24 other devices.
  • 9 V Front-Loading Battery Backup – Change the battery without removing the unit from the ceiling.
  • Multi-function One Button Design includes:
    • Test Feature – Simultaneously tests the unit’s electronics and verifies proper operation.
    • Hush® Feature – Temporarily silences nuisance alarms for approximately 10 minutes
    • Reset Feature – Resets the carbon monoxide alarm
    • Alarm / Peak Level Memory – If alarm has detected a CO level of 100ppm or higher since it was last reset, the green LED will blink once every 16 seconds and a voice alarm will announce “Caution! Carbon Monoxide Previously Detected” if the Test / Reset button is pressed.
  • Tamper Resistant –  Deters removal of the unit from the wall or ceiling.
  • Item #: 900-0213CA  Model #: KN-COPE-ICCA
  • Power Source

    Hardwired with Battery Backup

  • Sensor

    Photoelectric, Electrochemical