Interconnectable Optical Rechargeable Smoke Alarm
2SFWR
-
Unique fast-fit system
-
Fast, push-fit connection
-
Sealed-in rechargeable Lithium cell for 6 months
-
Interconnectable
-
Deep Base – allows easier wiring
-
Tamper-proof batteries
-
Mains-powered Optical smoke alarm from the ‘Slick’ range of fast-fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms.
-
The ‘Slick’ range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D, BS5839, Part 6).
-
Unique fast-fit system with separate base plate, for ease of fitting and maintenance
-
Integral, double-decker screwless terminal block for fast, push-fit connection
-
Auto reset after activation
-
Separate Test and Hush buttons to test and temporarily silence nuisance alarms
-
Sealed-in rechargeable Lithium cell for 6 months continuous operation in event of mains failure
-
Interconnectable with other Kidde mains smoke and heat alarms and Kidde mains CO alarms using ‘Smart Interconnect’ technology
-
Tamper-resistant locking device – prevents unauthorised removal without the use of a tool
-
Deep Base – allows easier wiring
-
Tamper-proof batteries – sealed-in to prevent removal
-
Model 2SFWR
-
Power Supply 230V mains powered with rechargeable sealed-in Lithium cells
-
Temperature Range 0ºC to +40ºC
-
Humidity Range Up to 93% Relative Humidity (RH) non-condensing
-
Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing
-
Alarm Dimensions 135 x 135 x 60mm (including ‘Slick’ mounting base)
-
Alarm Weight 247g
-
Warranty 10 years (including batteries)
-
Approvals BSI certified to BS EN14604:2005
-
CE tested and certified
-
Associated Standard BS 5839 Part 6 Grade D
-
Sensor Optical chamber with insect-resistant width slot entry inlet portals
-
Chamber Size 41mm outside diameter x 16mm approximate depth (external)
-
Sensitivity Complies with BS EN14604:2005
-
Detection Band infrared light wavelength
-
Button Test Simulates the effect of smoke within the sensing chamber, checks electronics and sounder
-
Automatic Self-test Circuitry is tested every 40 seconds and unit beeps if fault is detected
-
Supply Voltage 230V AC, 50 Hz (nominal UK voltage)
-
Power Consumption Maximum 80mA
-
Battery Back-up Non user-replaceable 4 x 3V rechargeable Lithium cells (ML 2430)
-
Battery Monitoring Battery is monitored and unit emits a single chirp every 40 seconds if a fault is present
-
Low Battery Warning 30-day low battery indicator
-
Power-on Indicator Continuous green LED
-
Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)
-
Sound Output 85dB (A) minimum at 3 metres
-
Alarm Frequency 3.2 kHz typical
-
Alarm Status Red LED flashes rapidly, typically once every 2/3 seconds = unit sensing a fire event
-
Red LED flashes once every 10 seconds = unit in hush condition, auto reset after 7 minutes
-
Red LED flashes once every 35 seconds = normal quiescent operation
-
Interconnection Up to 24 units (smoke, heat and CO) can be hardwire interconnected using SMART® interconnect system with optional control (see below)
-
Optional Controls Wireless Base Remote Test and Hush Unit (KN-RTH-RF) when used with Wireless Base
-
Fixing ‘Slick’ mounting deep base as supplied
-
Base Cable Connect. Screwless Terminal Block with slot release feature for conductors
Attic/loft
(Where lofts are habitable spaces and not ‘cold’/dusty lofts) |
Bedrooms | Living Room | Hallway/Corridor
(For minimum protection) |
---|
-
Mains-powered Optical smoke alarm from the ‘Slick’ range of fast-fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms.
-
The ‘Slick’ range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D, BS5839, Part 6).
-
Unique fast-fit system with separate base plate, for ease of fitting and maintenance
-
Integral, double-decker screwless terminal block for fast, push-fit connection
-
Auto reset after activation
-
Separate Test and Hush buttons to test and temporarily silence nuisance alarms
-
Sealed-in rechargeable Lithium cell for 6 months continuous operation in event of mains failure
-
Interconnectable with other Kidde mains smoke and heat alarms and Kidde mains CO alarms using ‘Smart Interconnect’ technology
-
Tamper-resistant locking device – prevents unauthorised removal without the use of a tool
-
Deep Base – allows easier wiring
-
Tamper-proof batteries – sealed-in to prevent removal
-
Model 2SFWR
-
Power Supply 230V mains powered with rechargeable sealed-in Lithium cells
-
Temperature Range 0ºC to +40ºC
-
Humidity Range Up to 93% Relative Humidity (RH) non-condensing
-
Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing
-
Alarm Dimensions 135 x 135 x 60mm (including ‘Slick’ mounting base)
-
Alarm Weight 247g
-
Warranty 10 years (including batteries)
-
Approvals BSI certified to BS EN14604:2005
-
CE tested and certified
-
Associated Standard BS 5839 Part 6 Grade D
-
Sensor Optical chamber with insect-resistant width slot entry inlet portals
-
Chamber Size 41mm outside diameter x 16mm approximate depth (external)
-
Sensitivity Complies with BS EN14604:2005
-
Detection Band infrared light wavelength
-
Button Test Simulates the effect of smoke within the sensing chamber, checks electronics and sounder
-
Automatic Self-test Circuitry is tested every 40 seconds and unit beeps if fault is detected
-
Supply Voltage 230V AC, 50 Hz (nominal UK voltage)
-
Power Consumption Maximum 80mA
-
Battery Back-up Non user-replaceable 4 x 3V rechargeable Lithium cells (ML 2430)
-
Battery Monitoring Battery is monitored and unit emits a single chirp every 40 seconds if a fault is present
-
Low Battery Warning 30-day low battery indicator
-
Power-on Indicator Continuous green LED
-
Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)
-
Sound Output 85dB (A) minimum at 3 metres
-
Alarm Frequency 3.2 kHz typical
-
Alarm Status Red LED flashes rapidly, typically once every 2/3 seconds = unit sensing a fire event
-
Red LED flashes once every 10 seconds = unit in hush condition, auto reset after 7 minutes
-
Red LED flashes once every 35 seconds = normal quiescent operation
-
Interconnection Up to 24 units (smoke, heat and CO) can be hardwire interconnected using SMART® interconnect system with optional control (see below)
-
Optional Controls Wireless Base Remote Test and Hush Unit (KN-RTH-RF) when used with Wireless Base
-
Fixing ‘Slick’ mounting deep base as supplied
-
Base Cable Connect. Screwless Terminal Block with slot release feature for conductors
Attic/loft
(Where lofts are habitable spaces and not ‘cold’/dusty lofts) |
Bedrooms | Living Room | Hallway/Corridor
(For minimum protection) |
---|