Skip to main content

Interconnectable Rechargeable Heat Alarm
3SFWR


  • Unique fast-fit system

  • Fast, push-fit connection

  • Sealed-in rechargeable Lithium cell for 6 months

  • Interconnectable

  • Deep Base – allows easier wiring

For large order quantities, please call our Customer Service team on 0800 917 0722
Power Source
230V AC
Sensor
Thermistor (Thermal Resistor) sensor within detection unit
Battery Back Up
Built in Rechargeable lithium back up
  • Mains powered heat alarm from the ‘Slick’ range of fast-fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms.

  • Ionisation alarms are for use in areas where there is danger from fast-flaming fires.

  • The ‘Slick’ range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D, BS5839, Part 6).

  • Unique fast-fit system with separate base plate, for ease of fitting and maintenance

  • Integral, double-decker screwless terminal block for fast, push-fit connection

  • Auto reset after activation with latching LED allowing the initiating alarm to be identified

  • Separate Test and Hush buttons to test and temporarily silence nuisance alarms

  • Sealed-in rechargeable Lithium cell for 6 months continuous operation in event of mains failure

  • Interconnectable with other Kidde mains smoke and heat alarms and Kidde mains CO alarms using ‘Smart Interconnect’ technology

  • Tamper-resistant locking device – prevents unauthorised removal without the use of a tool

  • Deep Base – allows easier wiring

  • Tamper-proof batteries – sealed-in to prevent removal

  • Model 3SFWR

  • Power Supply 230V mains powered with rechargeable sealed-in Lithium cell

  • Temperature Range 0ºC to +40ºC

  • Humidity Range Up to 93% Relative Humidity (RH) non-condensing

  • Storage and Transport -20oC to +60oC and 5 – 95% relative humidity (RH) non-condensing

  • Alarm Dimensions 135 x 135 x 60mm (including ‘Slick’ mounting base)

  • Alarm Weight 240g

  • Warranty 10 years (including battery

  • Approvals BSI certified to BS5446 Part 2:2003

  • CE tested and certified

  • Associated Standard BS 5839 Part 6 Grade D

  • Sensor Thermistor (Thermal resistor) within detection unit

  • Sensitivity Complies with BS 5446 Part2:2003, as a Class A2 device, alarms between 54ºC and 70ºC

  • Button Test Simulates the effect of heat at the sensor, checks electronics and sounder

  • Automatic Self-test Circuitry is tested every 40 seconds and unit beeps if fault is detected

  • Supply Voltage 230V AC, 50 Hz (nominal UK voltage)

  • Power Consumption Maximum 80mA

  • Battery Back-up Non user-replaceable Lithium Polymer Cell

  • Battery Monitoring Battery is monitored and unit emits a single chirp every 40 seconds if a fault is present

  • Low Battery Warning 30-day low battery indicator

  • Power-on Indicator Continuous green LED

  • Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)

  • Sound Output 85dB (A) minimum at 3 metres

  • Alarm Frequency 3.2 kHz typical

  • Alarm Status Red LED flashes rapidly, typically once every 2/3 seconds = unit sensing a fire event

  • Red LED double flashes every 30 seconds = unit is triggering unit (press test button to unlatch)

  • Red LED flashes once every ten seconds = in hush condition (auto-reset after 7 minutes)

  • Red LED flashes once every 35 seconds = normal quiescent operation

  • Interconnection Up to 24 units (smoke, heat and CO) can be hardwire interconnected using SMART® interconnect system with optional control (see below)

  • Optional Controls Wireless Base Remote Test and Hush Unit (KN-RTH-RF) when used with Wireless Base

  • Fixing ‘Slick’ mounting deep base as supplied

  • Base Cable Connect. Screwless Terminal Block with slot release feature for conductor

Living Room
(If smoke alarm cannot be installed)
Kitchen Garage
(For internal garages)
  • Mains powered heat alarm from the ‘Slick’ range of fast-fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms.

  • Ionisation alarms are for use in areas where there is danger from fast-flaming fires.

  • The ‘Slick’ range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D, BS5839, Part 6).

  • Unique fast-fit system with separate base plate, for ease of fitting and maintenance

  • Integral, double-decker screwless terminal block for fast, push-fit connection

  • Auto reset after activation with latching LED allowing the initiating alarm to be identified

  • Separate Test and Hush buttons to test and temporarily silence nuisance alarms

  • Sealed-in rechargeable Lithium cell for 6 months continuous operation in event of mains failure

  • Interconnectable with other Kidde mains smoke and heat alarms and Kidde mains CO alarms using ‘Smart Interconnect’ technology

  • Tamper-resistant locking device – prevents unauthorised removal without the use of a tool

  • Deep Base – allows easier wiring

  • Tamper-proof batteries – sealed-in to prevent removal

  • Model 3SFWR

  • Power Supply 230V mains powered with rechargeable sealed-in Lithium cell

  • Temperature Range 0ºC to +40ºC

  • Humidity Range Up to 93% Relative Humidity (RH) non-condensing

  • Storage and Transport -20oC to +60oC and 5 – 95% relative humidity (RH) non-condensing

  • Alarm Dimensions 135 x 135 x 60mm (including ‘Slick’ mounting base)

  • Alarm Weight 240g

  • Warranty 10 years (including battery

  • Approvals BSI certified to BS5446 Part 2:2003

  • CE tested and certified

  • Associated Standard BS 5839 Part 6 Grade D

  • Sensor Thermistor (Thermal resistor) within detection unit

  • Sensitivity Complies with BS 5446 Part2:2003, as a Class A2 device, alarms between 54ºC and 70ºC

  • Button Test Simulates the effect of heat at the sensor, checks electronics and sounder

  • Automatic Self-test Circuitry is tested every 40 seconds and unit beeps if fault is detected

  • Supply Voltage 230V AC, 50 Hz (nominal UK voltage)

  • Power Consumption Maximum 80mA

  • Battery Back-up Non user-replaceable Lithium Polymer Cell

  • Battery Monitoring Battery is monitored and unit emits a single chirp every 40 seconds if a fault is present

  • Low Battery Warning 30-day low battery indicator

  • Power-on Indicator Continuous green LED

  • Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)

  • Sound Output 85dB (A) minimum at 3 metres

  • Alarm Frequency 3.2 kHz typical

  • Alarm Status Red LED flashes rapidly, typically once every 2/3 seconds = unit sensing a fire event

  • Red LED double flashes every 30 seconds = unit is triggering unit (press test button to unlatch)

  • Red LED flashes once every ten seconds = in hush condition (auto-reset after 7 minutes)

  • Red LED flashes once every 35 seconds = normal quiescent operation

  • Interconnection Up to 24 units (smoke, heat and CO) can be hardwire interconnected using SMART® interconnect system with optional control (see below)

  • Optional Controls Wireless Base Remote Test and Hush Unit (KN-RTH-RF) when used with Wireless Base

  • Fixing ‘Slick’ mounting deep base as supplied

  • Base Cable Connect. Screwless Terminal Block with slot release feature for conductor

Living Room
(If smoke alarm cannot be installed)
Kitchen Garage
(For internal garages)