Skip to main content

Interconnectable Ionisation Smoke Alarm with Long-Life Back-up Battery
KF10LL


  • Interlink with up to 23 Firex hard-wired alarms

  • Alarm memory

  • Tamper-resistant locking device

  • Mains operation – 9V Lithium back-up battery supplied

For large order quantities, please call our Customer Service team on 0800 917 0722
Power Source
230V AC Mains
Sensor
Ionisation, circular metal chamber with 24-slot entry portals
Battery Back Up
9V Lithium back up supplied

  • Mains-powered ionisation smoke alarm that can be interlinked with up to 23 other Kidde mains alarms, be they ionisation, optical or heat. Once interlinked, the detection of the relevant danger by an individual unit will sound across all the connected alarms.

  • Ionisation alarms are for use in areas where there is danger from fast-flaming fires.

  • This mains-powered unit complies with UK Building Regulations for new housing and associated standards (Grade D BS 5839, Part 6) and should be installed by a qualified electrician. It can be used throughout the home, except in the kitchen where a Firex Heat Alarm is recommended.

  • Interlink with up to 23 Firex hard-wired alarms – all alarms sound if danger is detected

  • Alarm memory – identifies source unit within interconnecting network

  • Combined Test/Hush button allows regular testing of alarm function and can be used to temporarily silence nuisance alarms

  • Auto reset after activation

  • Tamper-resistant locking device – prevents unauthorised removal without the use of a tool

  • Mains operation – 9V Lithium back-up battery supplied as standard

  • Model KF10LL

  • Power Supply 230V mains-powered with 9V Alkaline battery back-up

  • Temperature Range 0ºC to + 40ºC

  • Humidity Range Up to 93% Relative Humidity (RH) non-condensing

  • Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing

  • Alarm Dimensions 127 x 127 x 39mm

  • Bracket Dimensions 133 x 133 x 6mm

  • Alarm Weight 231g

  • Warranty 6 years

  • Approvals BSI certified to BS EN14604:2005

  • CE tested and certified Sensor Ionisation, circular metal chamber with 24-slot entry portals

  • Source Americium 241 (<1.0 microcurie, 37kBq)

  • Button Test Simulates the effect of smoke within the sensing chamber, checks electronics and sounder

  • Automatic Self-test Circuitry is tested and unit beeps (chirps) if fault is detected

  • Supply Voltage 230V AC, 50 Hz (nominal UK voltage)

  • Power Consumption < 15mA

  • Connection Push-in/snap-fit type connector with 150mm long flying leads (supplied)

  • Battery Back-up User-replaceable alkaline 9V battery (522/6LR61)

  • Power-on Indicator Continuous green LED

  • Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)

  • Sound Output 85dB (A) minimum at 3 metres

  • Alarm Frequency 3.2 kHz typical

  • Dust Protection In-built foam gasket in rear of alarm to prevent dust ingress into rear of the alarm

  • Alarm Status Red LED flashes approx once every five minutes = normal operation

  • Red LED flashes once a second = sensing smoke (sounder alarm sounds)

  • Red LED flashes once every ten seconds = in hush condition (auto-reset after 15 minutes)

  • Interconnection Up to 24 Firex and Kidde ‘Slick’ units (smoke, heat and CO) can be hardwire interconnected with optional control (see below)

  • Optional Controls Wired Remote Test and Hush Unit (REMTH) allows test and hush of interlinked units

  • Optional Pattresses SMK23RU also has integral switchable relay for operating remote devices

  • SMK4896 – Surface mounting base for added ease of installation

  • Fixing Mounting bracket ring supplied with two ‘T’ slot fitting option

  • 57mm spacing to a maximum of 90mm for standard screw fittings on back boxes

  • Bracket has 50mm diameter central access hole for cabling

  • Plastics used NORYL – Cover, main body and mounting bracket

  • Lead-Free Status All Firex alarms are lead-free

  • Mains-powered ionisation smoke alarm that can be interlinked with up to 23 other Kidde mains alarms, be they ionisation, optical or heat. Once interlinked, the detection of the relevant danger by an individual unit will sound across all the connected alarms.

  • Ionisation alarms are for use in areas where there is danger from fast-flaming fires.

  • This mains-powered unit complies with UK Building Regulations for new housing and associated standards (Grade D BS 5839, Part 6) and should be installed by a qualified electrician. It can be used throughout the home, except in the kitchen where a Firex Heat Alarm is recommended.

  • Interlink with up to 23 Firex hard-wired alarms – all alarms sound if danger is detected

  • Alarm memory – identifies source unit within interconnecting network

  • Combined Test/Hush button allows regular testing of alarm function and can be used to temporarily silence nuisance alarms

  • Auto reset after activation

  • Tamper-resistant locking device – prevents unauthorised removal without the use of a tool

  • Mains operation – 9V Lithium back-up battery supplied as standard

  • Model KF10LL

  • Power Supply 230V mains-powered with 9V Alkaline battery back-up

  • Temperature Range 0ºC to + 40ºC

  • Humidity Range Up to 93% Relative Humidity (RH) non-condensing

  • Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing

  • Alarm Dimensions 127 x 127 x 39mm

  • Bracket Dimensions 133 x 133 x 6mm

  • Alarm Weight 231g

  • Warranty 6 years

  • Approvals BSI certified to BS EN14604:2005

  • CE tested and certified Sensor Ionisation, circular metal chamber with 24-slot entry portals

  • Source Americium 241 (<1.0 microcurie, 37kBq)

  • Button Test Simulates the effect of smoke within the sensing chamber, checks electronics and sounder

  • Automatic Self-test Circuitry is tested and unit beeps (chirps) if fault is detected

  • Supply Voltage 230V AC, 50 Hz (nominal UK voltage)

  • Power Consumption < 15mA

  • Connection Push-in/snap-fit type connector with 150mm long flying leads (supplied)

  • Battery Back-up User-replaceable alkaline 9V battery (522/6LR61)

  • Power-on Indicator Continuous green LED

  • Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)

  • Sound Output 85dB (A) minimum at 3 metres

  • Alarm Frequency 3.2 kHz typical

  • Dust Protection In-built foam gasket in rear of alarm to prevent dust ingress into rear of the alarm

  • Alarm Status Red LED flashes approx once every five minutes = normal operation

  • Red LED flashes once a second = sensing smoke (sounder alarm sounds)

  • Red LED flashes once every ten seconds = in hush condition (auto-reset after 15 minutes)

  • Interconnection Up to 24 Firex and Kidde ‘Slick’ units (smoke, heat and CO) can be hardwire interconnected with optional control (see below)

  • Optional Controls Wired Remote Test and Hush Unit (REMTH) allows test and hush of interlinked units

  • Optional Pattresses SMK23RU also has integral switchable relay for operating remote devices

  • SMK4896 – Surface mounting base for added ease of installation

  • Fixing Mounting bracket ring supplied with two ‘T’ slot fitting option

  • 57mm spacing to a maximum of 90mm for standard screw fittings on back boxes

  • Bracket has 50mm diameter central access hole for cabling

  • Plastics used NORYL – Cover, main body and mounting bracket

  • Lead-Free Status All Firex alarms are lead-free