Interconnectable Heat Alarm with Rechargeable Battery
KF30R
-
Interlink with up to 23 Firex hard-wired alarms
-
Alarm memory
-
Dust compensation and bug screen
-
Auto reset after activation
-
Tamper-resistant locking device
-
Mains operation – Built-in rechargeable Lithium back-up
-
Mains-powered heat alarm that can be interlinked with up to 23 other Kidde mains alarms, be they ionisation, optical or heat.
-
Once interlinked, the detection of the relevant danger by an individual unit will sound across all the connected alarms.
-
Mains-powered heat alarms can be used throughout the home in humid or dusty environments where an optical or ionisation smoke alarm is unsuitable, e.g. kitchens, loft spaces and garages.
-
The Firex range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D BS 5839, Part 6).
-
Interlink with up to 23 Firex hard-wired alarms – all alarms sound if danger is detected
-
Alarm memory – identifies source unit within interconnecting network
-
Combined Test/Hush button allows regular testing of alarm function and can be used to temporarily silence nuisance alarms
-
Auto reset after activation
-
Tamper-resistant locking device – prevents unauthorised removal without the use of a tool
-
Mains operation – Built-in rechargeable Lithium back-up tamper-proof battery
-
Model KF30R
-
Power Supply 230V mains-powered with rechargeable Lithium battery back-up
-
Temperature Range 0ºC to + 40ºC
-
Humidity Range Up to 93% Relative Humidity (RH) non-condensing
-
Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing
-
Alarm Dimensions 127 x 127 x 39mm (not including heat sensor guard)
-
Bracket Dimensions 133 x 133 x 6mm
-
Alarm Weight 180g
-
Warranty 6 years (including battery)
-
Approvals BSI certified to BS5446 Part 2: 2003
-
CE tested and certified
-
Sensor Thermistor (Thermal Resistor) within detection unit
-
Button Test Simulates the effect of heat at the sensor, checks electronics and sounder
-
Automatic Self-test Circuitry is tested and unit beeps (chirps) if fault is detected
-
Supply Voltage 230V AC, 50 Hz (nominal UK voltage)
-
Power Consumption < 15mA
-
Connection Push-in/snap-fit type connector with 150mm long flying leads (supplied)
-
Battery Back-up Non user-replaceable 3 x 3V rechargeable Lithium Aluminium Alloy / Magnesium Composite
-
Oxide cells (ML2430)
-
Power-on Indicator Continuous green LED
-
Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses) with soldered contacts
-
Sound Output 85dB (A) minimum at 3 metres
-
Alarm Frequency 3.2 kHz typical
-
Alarm Status Red LED flashes approx once every five minutes = normal operation
-
Red LED flashes once a second = sensing heat in excess of 58ºC (sounder alarm sounds)
-
Interconnection Up to 24 Firex and Kidde ‘Slick’ units (smoke, heat and CO) can be hardwire interconnected with optional control (see below)
-
Optional Controls Wired Remote Test and Hush Unit (REMTH) allows test and hush of interlinked units
-
Optional Pattresses SMK23RU also has integral switchable relay for operating remote devices
-
SMK4896 – Surface mounting base for added ease of installation
-
Fixing Mounting bracket ring supplied with two ‘T’ slot fitting option
-
57mm spacing to a maximum of 90mm for standard screw fittings on back boxes
-
Bracket has 50mm diameter central access hole for cabling
-
Plastics used NORYL – Cover, main body and mounting bracket
-
Lead-Free Status All Firex alarms are lead-free
Living Room
(If smoke alarm cannot be installed) |
Kitchen | Garage |
---|
-
Mains-powered heat alarm that can be interlinked with up to 23 other Kidde mains alarms, be they ionisation, optical or heat.
-
Once interlinked, the detection of the relevant danger by an individual unit will sound across all the connected alarms.
-
Mains-powered heat alarms can be used throughout the home in humid or dusty environments where an optical or ionisation smoke alarm is unsuitable, e.g. kitchens, loft spaces and garages.
-
The Firex range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D BS 5839, Part 6).
-
Interlink with up to 23 Firex hard-wired alarms – all alarms sound if danger is detected
-
Alarm memory – identifies source unit within interconnecting network
-
Combined Test/Hush button allows regular testing of alarm function and can be used to temporarily silence nuisance alarms
-
Auto reset after activation
-
Tamper-resistant locking device – prevents unauthorised removal without the use of a tool
-
Mains operation – Built-in rechargeable Lithium back-up tamper-proof battery
-
Model KF30R
-
Power Supply 230V mains-powered with rechargeable Lithium battery back-up
-
Temperature Range 0ºC to + 40ºC
-
Humidity Range Up to 93% Relative Humidity (RH) non-condensing
-
Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing
-
Alarm Dimensions 127 x 127 x 39mm (not including heat sensor guard)
-
Bracket Dimensions 133 x 133 x 6mm
-
Alarm Weight 180g
-
Warranty 6 years (including battery)
-
Approvals BSI certified to BS5446 Part 2: 2003
-
CE tested and certified
-
Sensor Thermistor (Thermal Resistor) within detection unit
-
Button Test Simulates the effect of heat at the sensor, checks electronics and sounder
-
Automatic Self-test Circuitry is tested and unit beeps (chirps) if fault is detected
-
Supply Voltage 230V AC, 50 Hz (nominal UK voltage)
-
Power Consumption < 15mA
-
Connection Push-in/snap-fit type connector with 150mm long flying leads (supplied)
-
Battery Back-up Non user-replaceable 3 x 3V rechargeable Lithium Aluminium Alloy / Magnesium Composite
-
Oxide cells (ML2430)
-
Power-on Indicator Continuous green LED
-
Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses) with soldered contacts
-
Sound Output 85dB (A) minimum at 3 metres
-
Alarm Frequency 3.2 kHz typical
-
Alarm Status Red LED flashes approx once every five minutes = normal operation
-
Red LED flashes once a second = sensing heat in excess of 58ºC (sounder alarm sounds)
-
Interconnection Up to 24 Firex and Kidde ‘Slick’ units (smoke, heat and CO) can be hardwire interconnected with optional control (see below)
-
Optional Controls Wired Remote Test and Hush Unit (REMTH) allows test and hush of interlinked units
-
Optional Pattresses SMK23RU also has integral switchable relay for operating remote devices
-
SMK4896 – Surface mounting base for added ease of installation
-
Fixing Mounting bracket ring supplied with two ‘T’ slot fitting option
-
57mm spacing to a maximum of 90mm for standard screw fittings on back boxes
-
Bracket has 50mm diameter central access hole for cabling
-
Plastics used NORYL – Cover, main body and mounting bracket
-
Lead-Free Status All Firex alarms are lead-free
Living Room
(If smoke alarm cannot be installed) |
Kitchen | Garage |
---|