Skip to main content
Share:

X9800 Single Frequency Infrared (IR) Flame Detector



The X9800 meets many third-party detection requirements and has field-proven detection capabilities, including immunity to many extraneous IR sources. 
  • Multiple sensitivity modes
  • Optical Integrity (oi®) performs automatic fail-safe checks every 60 seconds
  • Heated optics for adverse environments and weather
  • Data logger with event time and date stamping (1500 events)
  • Suitable for both indoor and outdoor applications
  • Meets NFPA 33 under 0.5-second response requirement (available on specific models)
  • Operating Voltage: 24 Vdc. Operating range is 18 to 30 Vdc Maximum ripple is 2 volts peak-to-peak.
  • Power Consumption: 2.5 watts @ 24 Vdc nominal; 16.5 watts @ 30 Vdc with EOL resistor installed and heater on maximum.
  • Relays: Contacts rated 5 amperes at 30 Vdc.
    Fire Alarm: Form C (NO and NC contacts); normally de-energised: latching/non-latching
    Fault: Form A (NO contacts); normally energszed; latching/non-latching
    Auxiliary*: Form C (NO and NC contacts); normally energised; latching/non-latching.
  • Current Output*: 0–20 mA (± 0.3 mA), with a maximum loop resistance of 500 ohms from 18–19.9 Vdc, 600 ohms from 20–30 Vdc.
  • Temperature Range: 
    Operating: –40°C to +75°C
    Storage: –55°C to +85°C
  • Humidity Range: 0 to 95% relative humidity, can withstand 100% condensing humidity for short periods of time.
  • Spectral Sensitivity Range: 4 - 5 microns.
  • Field of View: The detector has a 90 degree cone of vision (horizontal) with the highest sensitivity lying along its central axis.
  • Warranty: 3 years.
  • Enclosure Material: Copper-free aluminum (painted) or stainless steel (316/CF8M cast)..
  • Conduit Entry Size: 3/4 inch NPT or M25.
  • Shipping Weight:  
    Aluminum: 3.2 kg 
    Stainless Steel: 6.7 kg
  • FM Approved
  • IEC 61508
  • VNIIFTRI
  • VNIIPO
  • DEMKO 01 ATEX 132195X
  • IECEx
  • UL-BR 17.0216X
  • Multiple sensitivity modes
  • Optical Integrity (oi®) performs automatic fail-safe checks every 60 seconds
  • Heated optics for adverse environments and weather
  • Data logger with event time and date stamping (1500 events)
  • Suitable for both indoor and outdoor applications
  • Meets NFPA 33 under 0.5-second response requirement (available on specific models)
  • Operating Voltage: 24 Vdc. Operating range is 18 to 30 Vdc Maximum ripple is 2 volts peak-to-peak.
  • Power Consumption: 2.5 watts @ 24 Vdc nominal; 16.5 watts @ 30 Vdc with EOL resistor installed and heater on maximum.
  • Relays: Contacts rated 5 amperes at 30 Vdc.
    Fire Alarm: Form C (NO and NC contacts); normally de-energised: latching/non-latching
    Fault: Form A (NO contacts); normally energszed; latching/non-latching
    Auxiliary*: Form C (NO and NC contacts); normally energised; latching/non-latching.
  • Current Output*: 0–20 mA (± 0.3 mA), with a maximum loop resistance of 500 ohms from 18–19.9 Vdc, 600 ohms from 20–30 Vdc.
  • Temperature Range: 
    Operating: –40°C to +75°C
    Storage: –55°C to +85°C
  • Humidity Range: 0 to 95% relative humidity, can withstand 100% condensing humidity for short periods of time.
  • Spectral Sensitivity Range: 4 - 5 microns.
  • Field of View: The detector has a 90 degree cone of vision (horizontal) with the highest sensitivity lying along its central axis.
  • Warranty: 3 years.
  • Enclosure Material: Copper-free aluminum (painted) or stainless steel (316/CF8M cast)..
  • Conduit Entry Size: 3/4 inch NPT or M25.
  • Shipping Weight:  
    Aluminum: 3.2 kg 
    Stainless Steel: 6.7 kg
  • FM Approved
  • IEC 61508
  • VNIIFTRI
  • VNIIPO
  • DEMKO 01 ATEX 132195X
  • IECEx
  • UL-BR 17.0216X